Offices Nationwide
Sound Insulation
Two parameters describe sound insulation; Dw and Rw. Dw is the insulation between rooms. Rw is the lab-tested insulation of a wall/floor...more
Sound Absorption
The loss of sound energy when sound waves come into contact with an absorbent material such as ceilings, walls, floors and other objects...more
Leeds - Code Assessment - 0113 850 0152
The office that covers this area is: Wakefield
Phone Number: 0113 850 0152 Email: leeds@e2consultants.co.uk
Sustainable Homes is sometimes referred to as Sustainable Homes, Code For Sustainable Homes, Code Assessments, Code For Sustainable Homes, C4SH - Code For Sustainable Homes.
A Code Assessment - A Code Assessment in Leeds
The A Code Assessment in Leeds is the environmental assessment method for rating and certifying the performance of new homes; it is also known in Wales as part of the Carbon Reduction Commitment Scheme. In England it was launched in December 2006, by, the Department for Communities and Local Government (CLG and became operational in April 2007 as the new national standard for sustainable design and construction of new homes. Since the 1st of May 2008 the developer of any new home in Leeds a must have a mandatory rating against the Code.
The Code measures the 'whole home' as a complete package, assessing its sustainability against nine categories
The UK Government has committed to a reduction in carbon emissions of 80% by the year 2050. Improvement of all the new and existing housing stock in Leeds will be instrumental in achieving this target. The key to achieving these carbon reduction targets, for new and existing dwellings in Leeds is by being more energy efficient. By having a Code Assessment, a level of reduction can be established.
The whole construction and house building industry must start building more sustainable properties in Leeds .To initiate this; the Government has introduced the new national standards for the use in the design and construction of new homes in Leeds . The Code Assessment for Sustainable Homes or the Carbon Reduction Commitment (CRC) is the means of assessment.
It is a compulsory requirement for every new dwelling in England to achieve a rating or score against the Code assessment (C4SH). Information on this rating is to be made available to all potential buyers through a (HIP) Home Information Pack. This indicates whether the home has been built to a specific level of the Code, and if so, which one.
The Code assessment measures the 'whole home' sustainability of a new dwelling in Leeds against the nine categories of sustainable design; this produces a rating of the 'whole home' as a complete package. Each category is then further divided into further components which are individually assessed against a performance target and awarded the relevant credits for achievement.
The CSH covers nine categories of sustainable design:
- Energy and CO2 emissions (M),
- Water (M),
- Materials (M),
- Surface Water Run-off (M),
- Waste (M),
- Pollution,
- Health and Wellbeing (M),
- Management,
- Ecology.
Code assessments in Leeds can only be carried out by a qualified and accredited Code Assessor. Assessments are generally a two-stage process: after Pre assessment, with the Design Stage, which leads to an interim certificate. This is followed by the Post Construction Stage, where the final certificate is issued. Evidence has to be collated and used to determine the rating via the number of credits that are awarded for each element. A summary report is submitted by the Code Assessor to the Code Service Provider for quality assurance and certification.
The levels of energy efficiency for the code (standard percentage better than Part L1A of the 2006 Building Regulations) are:
- level 1 - 10%
- level 2 - 18%
- level 3 - 25%
- level 4 - 44%
- level 5 - 100%
- level 6 - zero carbon.
All proposed sites, dwellings and developments requiring an assessment should be registered with the Code Assessors accreditation body as early as possible. A proposed development can only be registered against the current version of the Code. Sites which have been registered in Leeds against a previous version can be re-registered under the current version of the Technical Guide. Each registration is valid only for a maximum of 5 years between the expiry of the Technical Guide version it was submitted against and the submission of the design stage report.
If you require free initial advice, consultancy services or a definitive quotation on a A Code Assessment assessment in Leeds call one of our Leeds consultants at our Leeds Office on 0113 850 0152 or Email leeds@eliteenergy.org.uk.
Copyright 2024 E2 Specialist Consultants Limited
Company No. 06728970