Northumberland - Code Assessment - 0191 633 0103

The office that covers this area is: Newcastle

The towns & cities that are covered within this county are:
Alnmouth, Alnwick, Amble, Ashington, Banburgh, Bedlington, Belford, Bellingham, Berwick upon Tweed, Blanchland, Brinkburn, Chillingham, Corbridge, Cramlington, Craster, Haltwhistle, Haydon Bridge, Hexham, Holy Island, Housesteads, Kielder, Morpeth, Once Brewed, Prudhoe, Rothbury, Seahouses, Warkworth, Wooler,

Phone Number: 0191 633 0103 Email: northumberland@e2consultants.co.uk

A Code Assessment - A Code Assessment in Northumberland

The A Code Assessment in Northumberland is the environmental assessment method for rating and certifying the performance of new homes; it is also known in Wales as part of the Carbon Reduction Commitment Scheme. In England it was launched in December 2006, by, the Department for Communities and Local Government (CLG and became operational in April 2007 as the new national standard for sustainable design and construction of new homes. Since the 1st of May 2008 the developer of any new home in Northumberland a must have a mandatory rating against the Code.

The Code measures the 'whole home' as a complete package, assessing its sustainability against nine categories

The UK Government has committed to a reduction in carbon emissions of 80% by the year 2050. Improvement of all the new and existing housing stock in Northumberland will be instrumental in achieving this target. The key to achieving these carbon reduction targets, for new and existing dwellings in Northumberland is by being more energy efficient. By having a Code Assessment, a level of reduction can be established.

The whole construction and house building industry must start building more sustainable properties in Northumberland .To initiate this; the Government has introduced the new national standards for the use in the design and construction of new homes in Northumberland . The Code Assessment for Sustainable Homes or the Carbon Reduction Commitment (CRC) is the means of assessment.

It is a compulsory requirement for every new dwelling in England to achieve a rating or score against the Code assessment (C4SH). Information on this rating is to be made available to all potential buyers through a (HIP) Home Information Pack. This indicates whether the home has been built to a specific level of the Code, and if so, which one.

The Code assessment measures the 'whole home' sustainability of a new dwelling in Northumberland against the nine categories of sustainable design; this produces a rating of the 'whole home' as a complete package. Each category is then further divided into further components which are individually assessed against a performance target and awarded the relevant credits for achievement.

The CSH covers nine categories of sustainable design:

1. Energy and CO2 emissions (M),
2. Water (M),
3. Materials (M),
4. Surface Water Run-off (M),
5. Waste (M),
6. Pollution,
7. Health and Wellbeing (M),
8. Management,
9. Ecology.

Code assessments in Northumberland can only be carried out by a qualified and accredited Code Assessor. Assessments are generally a two-stage process: after Pre assessment, with the Design Stage, which leads to an interim certificate. This is followed by the Post Construction Stage, where the final certificate is issued. Evidence has to be collated and used to determine the rating via the number of credits that are awarded for each element. A summary report is submitted by the Code Assessor to the Code Service Provider for quality assurance and certification.

The levels of energy efficiency for the code (standard percentage better than Part L1A of the 2006 Building Regulations) are:

1. level 1 - 10%
2. level 2 - 18%
3. level 3 - 25%
4. level 4 - 44%
5. level 5 - 100%
6. level 6 - zero carbon.

All proposed sites, dwellings and developments requiring an assessment should be registered with the Code Assessors accreditation body as early as possible. A proposed development can only be registered against the current version of the Code. Sites which have been registered in Northumberland against a previous version can be re-registered under the current version of the Technical Guide. Each registration is valid only for a maximum of 5 years between the expiry of the Technical Guide version it was submitted against and the submission of the design stage report.

If you require free initial advice, consultancy services or a definitive quotation on a A Code Assessment assessment in Northumberland call one of our Northumberland consultants at our Northumberland Office on 0191 633 0103 or Email northumberland@eliteenergy.org.uk.

Our other services include:

Code Assessment can also be known as:
C4SH, Code for Sustainable Homes, Code for Sustainable Homes Daylight Calculation, Sustainable Homes, CSH,